The foundation of the electronics industry and  printed circuit is used in majority of products, can now be made in a array of materials to work with most applications. is able to supply rigid pcb, flex pcb , rigid flex pcb and so on .

A printed circuit board (PCB) mechanically supports and electrically connects

electronic components or electrical components using conductive tracks, pads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate. Components are generally soldered onto the PCB to both electrically connect and mechanically fasten them to it.

Printed circuit boards are used in all but the simplest electronic products. They are also used in some electrical products, such as passive switch boxes.

Alternatives to PCB include wire wrap and point-to-point construction, both once popular but now rarely used. PCB require additional design effort to lay out the circuit, but manufacturing and assembly can be automated. Specialized CAD software is available to do much of the work of layout. Mass-producing circuits with PCB is cheaper and faster than with other wiring methods, as components are mounted and wired in one operation. Large numbers of PCB can be fabricated at the same time, and the layout only has to be done once. PCB can also be made manually in small quantities, with reduced benefits.

PCB can be single-sided (one copper layer), double-sided (two copper layers on both sides of one substrate layer), or multi-layer (outer and inner layers of copper, alternating with layers of substrate). Multi-layer PCB allow for much higher component density, because circuit traces on the inner layers would otherwise take up surface space between components. The rise in popularity of multilayer PCB with more than two, and especially with more than four, copper planes was concurrent with the adoption of surface mount technology. However, multilayer PCB make repair, analysis, and field modification of circuits much more difficult and usually impractical.

Whether you need a few boards fast, or a lot of boards on a schedule; whether you need simple pinout/breakout boards or highly complex RF/Microwave boards, Uni-Venture has a service that fits your needs.